PSU Salvage?
#16
Posted 05 December 2008 - 12:30 AM
But, next time, for anyone, if this happens, use a hair dryer!
on low-heat-setting, it'll dry your PSU excellent, after drying it, rinse it with distilled water and dry again, otherwise it might get rusty, which sucks too...
Ow, and btw, is it a SolidState PSU? If so... please throw it in the bin, your SSC's are most probably damaged, they are excellent, until just the slightest of environmental influence goes wrong.
#17
Posted 05 December 2008 - 01:04 AM
On edit, it was back in May 2007:
http://www.bit-tech.net/news/2007/05/28/oc...er_pc_cooling/1
Quote
PC Power & Cooling isn't the biggest brand in the business, so I wouldn't even be surprised if you hadn't heard it. What they are is renowned for building some of the most reliable, best PSUs in the business - at quite a price. A 750W PSU (not modular) will run you $200 USD before shipping, and the usual dollar equals pound pricing strategy applies for those of you in the UK.
The acquisition should be a great fit for OCZ Technology, which has largely built more "mainstream" enthusiast PSUs. Though it's products almost always well-built and a great price, they're not usually known as being the best of the best - they're designed to be the best at a particular price bracket.
The addition of PC Power & Cooling should give the company some great advancements in its power regulation, while sharing some convenience tech (like modularity) with its acquisition. OCZ Technology intends to keep PC Power & Cooling's brand and product, turning it into the company's premium line. This could be some great news for the PCP&C brand, because it will now get OCZ's excellent marketing reach.
Edited by eniparadoxgma, 05 December 2008 - 01:06 AM.
#18
Posted 05 December 2008 - 01:09 AM
still, my cleaning procedure stands
#19
Posted 05 December 2008 - 02:21 AM
I don't believe they are waterproof and water usually washes out any lubricant, so I wouldn't be putting any distilled water on it either.
#20 Guest_scaramonga_*
Posted 05 December 2008 - 02:54 AM
#21
Posted 05 December 2008 - 03:50 AM
#22
Posted 05 December 2008 - 04:03 AM
scaramonga, on Dec 4 2008, 06:54 PM, said:
A PSU shouldn't have any residual voltage-
the motherboard will store some in it's capacitors, but unless there is a storage source, like a capacitor or battery, the voltage is lost when the current is turned off
#23
Posted 05 December 2008 - 03:23 PM
Edited by stormrosson, 05 December 2008 - 03:28 PM.
#24 Guest_scaramonga_*
#25 Guest_scaramonga_*
Posted 05 December 2008 - 08:11 PM
Cleaned it all out, including fan, which I tested separately, and was working fine. Blasted both sides of circuitry with hairdryer for quite a while, in fact, heatsinks were too hot to touch lol.
Reassembled unit in anticipation and used a PSU tester on 24pin line to try out.
I can hear all the sniggering before I reveal the result..............
POP!!!!
Not a big one, but it popped and took the plug fuse with it.
I'm now going to microwave my head.
#27
Posted 05 December 2008 - 10:21 PM
#28 Guest_scaramonga_*
Posted 05 December 2008 - 10:29 PM
#29
Posted 05 December 2008 - 11:00 PM
#30
Posted 05 December 2008 - 11:04 PM
from a uk site, they quote the price as 125 or so pounds
5 user(s) are reading this topic
0 members, 5 guests, 0 anonymous users